Click image to zoom
4037469 HX35 Turbocharger Replacement for Komatsu & Cummins QSB Engines
Aftermarket HX35 turbocharger, part 4037469, for Komatsu excavators and Cummins QSB 6.7L engines. Verify engine code and OEM reference numbers before ordering.
Orders without stock ship approximately 60 days after ordering. Estimated ship date if ordered today: .
Show more cross references
2835695 4033150H 4037470 4038210 4038258 4038288 4045785 4046281 4955155 4955159 5359324 5452777 6745-81-8010 6745-82-8010 6754-81-8010 6754818090 6754-81-8090 6754-81-8140 6754-82-8010Subtotal: CA$ 210
Standard shipping for one packed item (CAD)
| Canada | CA$ 357.96 |
|---|
Orders without stock ship approximately 60 days after ordering. Estimated ship date if ordered today: .
Standard rates exclude duties, taxes and remote-area, residential or special-packaging charges. Sales confirms the total before payment.
Shipping zones and full policyThis aftermarket HX35 turbocharger, part number 4037469, serves as a replacement unit for Komatsu excavators and Cummins QSB 6.7L engines. It is a reference application for models such as the Komatsu PC200 and Hyundai Robex 210, where buyers should verify engine codes and OEM reference numbers before ordering.
Key Specifications
Part number 4037469 identifies this HX35 turbocharger assembly for replacement use in Komatsu and Cummins-powered equipment. The unit features a cast turbine housing with a vertical exhaust inlet and a machined compressor housing with a circular air inlet. Visible fasteners and gasket material secure the central bearing housing joint. Packing dimensions are 32x27x34 cm with a gross weight of 14 kg. Representative OEM reference numbers include 2835695, 4033150H, and 4037470. Buyers should verify these references against their specific engine code and vehicle application before ordering.
Application & Compatibility
Source application path clues for buyer verification. These are source category/application paths, not confirmed fitment claims:
- KOMATSU > KOMATSU EXCAVATOR > QSB TIER 3 SAA6D107E-1
- Case > Case CX210 > Case CX210 Excavator > Cummins QSB 6.7L
- HYUNDAI > Hyundai Robex 210 > Hyundai Robex 210LC-9 Excavator > Cummins QSB 6.7 (Tier 3)
- HYUNDAI > Hyundai Robex 210 > Hyundai Robex 210LC-9 Excavator > Cummins QSB 6.7
- HYUNDAI > Hyundai Robex 290 > Hyundai Robex 290LC-9 Excavator > Cummins QSB 6.7
- JCB > JCB Fastrac > JCB 3200 Fastrac > Cummins QSB 6.7
- JCB > JCB Fastrac > JCB Fastrac 2155 > Cummins QSB 6.7 (Tier 3)
- KOMATSU > Komatsu Forklift > Komatsu Lift Trucks > Komatsu 6D107
- KOMATSU > Komatsu PC200 > Komatsu PC200-8 > Komatsu 6D107
- KOMATSU > Komatsu PC200 > Komatsu PC200-8 > Komatsu 6D107E
- KOMATSU > Komatsu PC200 > Komatsu PC200-8 > Komatsu SAA6D107E-1
- KOMATSU > Komatsu PC200 > Komatsu PC200-8M0 > Komatsu 6D107E
- KOMATSU > Komatsu PC200 > Komatsu PC200LC-8 > Komatsu 6D107
- KOMATSU > Komatsu PC210 > Komatsu PC210-10M0 > Komatsu 6D107E
- KOMATSU > Komatsu PC210 > Komatsu PC210-8 > Komatsu 6D107E
- KOMATSU > Komatsu PC210 > Komatsu PC210LC-10M0 > Komatsu 6D107E
- KOMATSU > Komatsu PC210 > Komatsu PC210NLC-8 > Komatsu 6D107E
- KOMATSU > Komatsu PC220 > Komatsu PC220-8 > Komatsu 6D107
- KOMATSU > Komatsu PC220 > Komatsu PC220-8 > Komatsu SAA6D107E-1
- KOMATSU > Komatsu PC240 > Komatsu PC240-8 > Komatsu 6D107
- KOMATSU > Komatsu PC240 > Komatsu PC240-8 > Komatsu SAA6D107E-1
- KOMATSU > Komatsu PC240 > Komatsu PC240LC-8 > Komatsu 6D107
This HX35 turbocharger is a reference application for Komatsu excavators equipped with SAA6D107E-1 or 6D107E engines, including PC200, PC210, PC220, and PC240 series models. It is also listed for Cummins QSB 6.7L engines in Case CX210, Hyundai Robex 210/290, and JCB Fastrac equipment. Buyers should verify the specific engine code, production year, and OEM reference numbers against their unit before ordering. Fitment is reference-based; confirm the exact turbo configuration and mounting flange alignment to ensure proper installation.
Technical Notes
The HX35 turbocharger assembly features a two-part design with a cast turbine housing and a machined compressor housing. Visible fasteners and gasket material secure the central bearing housing joint, while stamped directional arrows on the turbine housing indicate rotation orientation. Buyers should inspect the turbine housing flange and compressor inlet for surface integrity during pre-shipment inspection. Verify that the mounting flange alignment and exhaust inlet orientation match your specific engine application before installation. Technical fitment support is available to assist with configuration verification for Komatsu and Cummins QSB engine variants.
B2B Supply
LeadTurbo supports B2B buyers, repair shops, and distributors with volume pricing and worldwide shipping for the 4037469 HX35 turbocharger. Technical fitment support is available to help verify engine codes, OEM reference numbers, and mounting detailss for Komatsu and Cummins QSB applications. Buyers can request documentation or clarification on specific reference numbers such as 2835695 or 4033150H before placing an order. This service helps ensure the correct replacement unit is selected for your specific equipment fleet.
Product FAQ
KOMATSU and other product, brand and model names are the property of their respective owners and are used for reference and application-lookup only. LeadTurbo is not affiliated with or endorsed by KOMATSU.
Compatibility Verify part number 4037469, engine code (e.g., SAA6D107E-1, Cummins QSB 6.7L), vehicle application, and OEM reference numbers (e.g., 2835695, 4033150H) before ordering. Fitment is reference-based; confirm against your specific unit.
Customer Reviews
Share installation notes, fitment feedback, or service experience for this product.
No customer reviews have been added for this product yet.
For More Information
Frequently Asked Questions
What types of turbocharger spare parts do you offer? Warranty, shipping, quality and more.
Complete Turbo Units
Complete turbo units designed for rigorous heavy-duty use where OEM units may fall short.
CHRA / Core Assemblies
Brand-new compatible CHRA cores — like-new performance at a fraction of replacement cost.
Turbine Wheels & Shafts
Precision-balanced turbine shafts engineered from inside out for superior durability.
Turbine Housings
Silicon-molybdenum (Si-Mo) nodular cast iron — engineered for extreme heat resistance.
Compressor Housings
OEM-matched geometry and surface finish — advanced casting and machining for perfect fitment.
Bearing Housings
Rock-solid platform engineered for high-output rebuilds — the foundation for performance.
Compressor Wheels
Aluminum, stainless steel, or titanium alloys — precision machined for superior responsiveness.
